Bateau Corsair 13 - March 16

Traffic was a breeze. The normal 1.5 hour trip came in at only about an hour. Classes must be winding down. More time to work on the boat!

Glassed up the vertical transom edges. Boy is it hard to work on a vertical. Should consider some kind of harness to rotate the bigger boats on their longitudinal axis. Seams will be have to be glassed so the hull does not move so much. Will post this on the forum.

Also, did some sanding of the glass edges as well as the thick spots of the epoxy coating.

Have a picture of the cracked bottom panels:

The cracks has been filled over but you can see the unfair curves. The masking tape is where I plan to amputate the panels and splice on replacements. Still waiting for Bateau to comment though.